To make the MonoBrick firmware connect to a WiFi you need to attach a WiFi dongle to the USB port on the EV3. The MonoBrick firmware image was been tested to work with both NetGear WNA1100 and the Edimax EW-7811UN WiFi dongles – but other might also work. To connect please follow the steps shown below
-
- Go To WiFi Connection
-
- Enter SSID
-
- Enter Password
-
- Select encryption type
-
- Press Connect and wait
-
- Connection established
Congratulations your EV3 has successfully connected to a WiFi network and you are now ready to do some awesome network programming.
Follow