How to start the programm vis xamarin on the EV3-Brick ?

[Carsten Groß]

Hello,

i got xamarin running, after a problem with copy the monoBrick.dll to the project.
I opened a Csharp – Mono Projekt in Xamarin, right?

Copy the example code above and in the Release Option i got a Code signing error, with debug it works, but how can i start that on the Brick, nothing happend after pressing “play”.

Brick is connected via usb because bluetooth directly quit.

How can i say xamarin to start the program on the Brick?
Thanks

[Anders Søborg]

Hi

I am a little confused…

Copy the example code above

What sample code – there are a lot of examples in the programming guide

Also it seems from the following quote

but how can i start that on the Brick, nothing happend after pressing “play”….

That you think that the communication library can run code on the brick. This is not the case. For this you need the MonoBrick firmware. MonoBrick communication library is used for USB, WiFi and Bluetooth communication with the EV3 running the standard firmware.

Anders

[Carsten Groß]

ok then its my fault.

I MUST BEFORE ANYTHING run the firmware on the brick? right?

But it dosent start/boot with my imadge made with the Mac.

Is the original Brick Firmeware relevant? which will work? we are using the current beta.

Thank you

[Anders Søborg]

Hi again

Is the original Brick Firmeware relevant? which will work?

Work for what? I am not sure I understand the question

Anders

[Author]

Posts