[doom_laur]

Thank you Anders and happy holidays! 🙂

[doom_laur]

Hmm, I’m not really sure what you mean. The 192.168.1.* is your local internet IP address, which EV3 would have if it would be connected with your Wi-Fi router. But if you’re connecting it with USB, the IP address you need to use is 10.0.1.1, as specified in the official guide for setting up a USB connection: http://www.monobrick.dk/guides/firmware-guides/setting-up-a-usb-connection-for-use-with-monobrick-firmware/

[doom_laur]

Hello Maurice,

If you connect the EV3 to your computer with an USB cable you need to be able to ping the address 10.0.1.1, and in order to connect the EV3 with WinSCP over USB you need to use the following settings:

File protocol: SCP
Host name: 10.0.1.1
Port number: 22
User name: root
Password: (leave empty)

Then you’ll be asked again to enter the password, just ignore it. Then an error will appear, just ignore it. Then it will work 🙂 You need to copy your programs in the folder ‘apps’ (/home/root/apps).

Hope this helps.

[Author]

Posts